Recommended user weight
Recommended user weight:
Less than 60 kg: the ideal board for easily starting out
Between 60 and 90 kg : board suitable for confirmed levels
Over 90 kg: board for advanced users only
Inflated shape and dimensions
The ITIWIT SUP SURF 10' is a "round pintail" SUP longboard ideal for fans who like making soft elegant curves in the waves.
Length: 10' (305 cm)
Width: 31" (79 cm)
Thickness: 3" (7.5 cm)
Volume: 140 litres
Board weight: 8.5 kg
Assembly and disassembly of the fins
Assembly in "2+1" The fin in the centre is the largest (ref: 8576512) and the 2 side fins (ref: 8502106) are smaller. The assembly ensures maximum stability and directionality.
"SINGLE" assembly: Only the largest fin (ref: 8576512) is installed in the centre. This assembly enables greater manoeuvrability.
Remember to remove the fins once you get out of the water.
If possible, rinse the fin base before and after use.
Inflating & deflating the Stand-Up Paddleboard
Make sure the valve’s orange button is up (closed), by pressing on it.
Connect the pump.
Inflate to 17 PSI.
The more inflated the SUP, the more stable it is and the better its movement.
Disconnect the pump and close the outer plug.
Firmly push the valve’s orange button to let the air out.
Do not put your face near and stay back.
Roll, starting from the opposite side to the valve to remove all the air.
Once the SUP is inflated the transport strap can be adjusted to the "WALK" position during transport. Before going surfing, put the strap in the "SURF" position and lock it, using the Velcro fastener.
Available in after-sales service from a workshop in the event of loss or breakage (ref: 966556).
Folding the board
Empty all the air from the board
Start folding up from the fin base, following the dotted lines to avoid damaging the base.
Stop halfway and start a second folding beginning from the valve side (wallet folding).
BAG CONTAINING THE FOLDED SUP:
Height: 90 cm
Width: 35 cm
Thickness: 20 cm
These dimensions leave space for the pump and paddle.
Interior pocket and compression system included
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided.
It is possible to change the valve if necessary, please contact the workshop of your Decathlon store.
We have a stand-up paddleboard repair kit, reference 8512384.
We recommend that you contact the workshop of your local store for all repairs.
Always wear your leash to stay attached to your board if you fall. It’s best to attach it to your ankle, but it can also be attached to the knee.
Remove it and rinse after each use.
Included with the boards:
- a carry bag
- a 10’ straight leash
- 2 small side fins with pins
1 central fin with pin
- 2 repair patches
- 1 instructions for use
- 1 carry strap
- 1 valve key
The paddle and pump are not included, we recommend you visit our website to properly equip yourself