Float tube for predator fishing FLTB 5 V2 Motorisable Grey / Orange
Easy to transport lightweight float tube thanks to the carry straps. The detachable storage bags make your fishing trips more comfortable.
This new version can be motorised with the FLTB MTR motor.
ID 8643994
- 365 days to return for members
compatibilityThis new version can be motorised with the FLTB MTR motor ref: 8666881.
sitting comfortInflatable, ergonomic, and adjustable seat. Optimised position for fishing.
stabilityThe 35 cm side air chamber diameter guarantees good stability when fishing.
modularityThe 3 storage bags can be positioned to meet your needs. You can add more bags.- SAFETYProduct certified by independent technical inspection: Type 2 of the standard ISO 6185. This product is not intended for use by children under 12 years of age. Teenagers from 13 to 17 years old must only use this product under the direct supervision of an adult. Always wear a life jacket. Refer to the local regulations and information about the dangers of float tubes and navigation. Maximum load: 130 kg Maximum motor power: 300 watts
- PRE-EQUIPPED FOR THE FLTB MTR MOTORThe FLTB-5 V2 is pre-equipped to easily add the FLTB MTR motor (8666881 not included) The motor can be quickly and easily clipped onto the base under the seat. The cable guide behind the backrest enables you to easily connect the motor to the battery (not included), which must be stored in a watertight storage bag at the rear. (8606699 not included) You now just have to position the control unit within reach.
- COMPATIBLE ACCESSORIESThe following compatible accessories will make your fishing outings more comfortable: (not included) 8606699 FLTB REAR BAKKAN: trapezoidal rear storage bag to increase your storage capacity 8737484 FLTB KPN: floating keepnet to keep your catch 8560032 FLTB SDC: rod rack to transport your 4 rigs in complete safety 8560034 FLTB SES: depth sounder support to easily install your electronics
- INFLATION AND INSTALLATIONLay the float tube out on a clean, flat surface. Inflate the seat, then the side air chambers to 1.5 PSI/0.1 bar to avoid any risk of over-inflation and/or explosion. We recommend using the pump FLTB PLP 10 PSI (ref: 8643922), which is equipped with a pressure gauge to guarantee accurate inflation. Once sitting, install the apron.
- DEFLATION AND STORAGETo deflate the float tube, unscrew the valves with caution. Fold the left side of the float tube over onto the seat, then repeat with the right side. Take hold of the tip, and fold it down over the length of the seat. Do the same with the ends of the two side float chambers. Insert the float tube into the bag. Once dry, your FLTB-5 can be stored folded inside the carry bag. You will extend its lifetime by storing it flat and slightly inflated.
- DIMENSIONS AND WEIGHTFLOAT TUBE FLTB-5 V2: 115 x 145 cm (width x length) Diameter of the side air chambers 35 cm Dimensions of the inflated seat: 46 x 40 cm (width x depth) Dimensions when folded in the carry bag: 75 x 43.5 x 10 cm Weight: 6.2 kg (without the storage bags and the carry bag) BAKKAN 500 S / Volume: 4 L Dimensions: 21.5 x 14.5 x 11 cm BAKKAN 500 M / Volume: 6 L Dimensions: 25 x 22 x 12 cm BAKKAN 500 L / Volume: 10 L Dimensions: 39.5 x 23.5 x 12 cm
- EQUIPMENTThe bag contains: - float tube with 4 valves and bladders positioned in the compartments - deck base and its measurement gauge (up to 60 cm) - built-in side rod holder (1 rod) - 3 bakkans for storing accessories (see dimensions below) - ventilated transport bag - user guide + user manual - repair kit without glue Materials used: Main section: P600 and PVC tarpaulin (0.45 mm) Air chambers: PVC (0.45 mm) Bakkans: PVC
- SPARE PARTSThe following parts are available on this web site or in our stores (to order): 8754652 SEAT AIR CHAMBER FLTB-5 8754650 BACKREST AIR CHAMBER FLTB-5 8552350 RIGHT AIR CHAMBER FLTB-5 8552351 LEFT AIR CHAMBER FLTB-5 8649864 MINI BOSTON VALVE (backrest and seat air chambers) 8649866 or 8187669 or 8338891 BOSTON VALVE (side air chambers) 8842490 APRON CONNECTOR FLTB-5 V2 8512384 REPAIR KIT
Features
Design benefits
Design details
Specifications
Details
| level of practice | intermediate |
| number of persons | 1 person |
| maximum load | 130 kg |
| main material | polyester |
| type of dinghy | inflatable |
| condition | new |
| length (in cm) | 145 cm |
| weight (in kg) | 6.2 kg |
| width (in cm) | 115 cm |
Composition
Film: 100.0% Polyvinyl Chloride |
Back fabric: 10.0% Polyurethane, 90.0% Polyvinyl Chloride |
Main fabric: 100.0% Polyester |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Dope dyed
Product made from 30% dope dyed yarnUsing this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
Repairability
Product designed to be repairable on more than 80% of breakages and failures.Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.
Seen on social media
@decathlon
