Features

Design benefits

robustness

Long-life treatment: Sheath is protected from dirt for a longer life

lightweight

48 g/m: an excellent compromise between solidity and weight.

ergonomic grip

Reassuring diameter for abseiling. Compatible with all belay devices.

stretch

Absorbs fall force well thanks to low impact force of 6.6 kN.

Design details

Long-life treatment:

Special treatment that increases the rope’s lifespan and prevents water and dirt seepage. Greater resistance to wear

PLASMA TREATMENT:

Special treatment helps to improve rope’s smoothness.

Ultrasound seal

Thanks to this new ultrasound fusion process, deterioration of rope ends is no longer an issue.

Middle marking:

To improve your safety, this rope features a black mark which indicates the middle of the rope.

Weight:

48 g/m PLEASE NOTE: Weight measurements made according to the EN 892 standard. For example, for a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions. This gives you the real weight of the rope, which is often superior to the weight given by the standard. The weight measurement according to the standard is used to compare two ropes to each other.

TECHNICAL FEATURES:

NUMBER OF FALLS: 8/22 IMPACT FORCE: 6.6/10.1 KN DYNAMIC ELONGATION: 26.2%/ 23.8% STATIC ELONGATION: 8.8%/ 8.4% SHEATH SLIP: 0 NUMBER OF SPINDLES: 40

WASHING THE ROPE:

It’s important to properly care for your rope to reduce wear. As dirt wears ropes down, we recommend: 1- using a rope cover; 2- If the rope is dirty, wash it with clean, lukewarm water. Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water. 3- Air dry the rope out of the sun and away from all sources of heat.

STORING THE ROPE:

Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.

INSPECTING THE ROPE:

It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!

Stds/Certif.

EN 892:2012+A3: 2023

Environmental impact

Ecodesign approach

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach

Designed to reduce environmental impact

Product made with a CO2eq reduction of 99% compared to the previous or similar product

weather protection	longlife protection (sheath)
diameter	8.6 mm
type of climbing rope	twin ropes, double ropes
rope length (in m)	60 m
main material	polyamide
condition	new
buoyancy	non-floating
length (in m)	60 m

Double climbing and mountaineering rope 8.6 mm x 60 m - RAPPEL 8.6 Blue

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Environmental impact

Ecodesign approach