Stay out for longer
Designed for temps down to -23°C, with a double layer of wadding, this parka can cope with near-Arctic conditions!
Stay out for longer
Designed for temps down to -23°C, with a double layer of wadding, this parka can cope with near-Arctic conditions!
Prepared for every downpour
It's fully waterproof, with taped seams - we tested it under a 5m column of water, and it stayed dry.
Snowstorm protection
An anti-blizzard hood and double zip will stop snow from getting in.
Stay out for longer
Designed for temps down to -23°C, with a double layer of wadding, this parka can cope with near-Arctic conditions!
| frequency | regular, intensive |
| main material | synthetic |
| waterproof | waterproof |
| hood | with hood |
| snap button, pocket with flap, zip closed pocket, warm fleece pocket, with pocket | |
| age | 7 to 15 years |
| sportsperson's height | height > 1.20 m |
| type of layer | layer 2 |
| style | plain |
| ventilation system | without ventilation |
| mm H2O (Schmerbers) | 5,000 mm |
| windproof | windproof |
| fit | straight |
| lining material | synthetic |
| type of length | mid-thigh |
| sleeves length | long sleeves |
| type of waterproofing | coating, membrane |
| type of hood | anti-blizzard hood, removable fur, lined hood |
Filling: 100.0% Polyester |
Main fabric: 100.0% Polyester |
Lining: 100.0% Polyester |
Yoke: 100.0% Polyamide |
Synthetic fur: 90.0% Acrylic, 10.0% Polyester |
Pocket: 100.0% Polyester |
Cuff: 18.0% Elastane, 82.0% Polyamide |
Coating: 100.0% Polyurethane |
Membrane: 100.0% Polyurethane |
We advise you to wash your jacket with the zip closed. Always make sure that this waterproof garment is completely dry before storing it.
Do not dry clean.
Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.
Maximum wash temperature of 40°C. Normal treatment.
Do not iron.
Bleaching excluded.
| Raw material | 87% |
| Manufacturing | 2% |
| Packaging | 1% |
| Distribution | 4% |
| Use | 5% |
| End of life | 1% |
It is calculated by modelling the life cycle of the product following the recommendations of the PEF methodology (Product Environmental Footprint). This carbon footprint is an estimate. It may therefore be slightly overvalued or undervalued.Learn more
Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 30%.
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.