We have reduced our environmental impact on this product
We have improved this product with an eco-design approach to the product materials. Textile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce our environmental impact, we use a mass pigmentation process that involves adding the colour pigments when the yarn itself is produced.
6 sqm living room with an inner tent height of 2.1 m.
This tent has several features:
- A foldaway basin-shape groundsheet at the entrance in case of rain
- Two transparent shuttered windows
- Shuttered mosquito net window
- Storage pockets in the bedrooms and living room.
Each bedroom in this tent is intended to accommodate a maximum of two 70 cm wide mattresses.The partition between the 2 bedrooms is removable.
Pitching and dismantling
All-in-one frame structure with pre-assembled bedrooms and flysheet.
The four coloured poles are to be inserted into their respective sleeves. Then make taut by positioning the poles in the black end pieces located below the flysheet. Drive in the V-shaped pegs at the two back corners, then pull the tent forwards. Then drive in the pegs at the two front corners.
We recommend that 2 people pitch the tent.
Our Fresh&Black technology relies on a UPF 50+ sun protection fabric.
Caution: be careful, as a large amount of UV rays can get in through a simple open door.
The ventilated flysheet on the living area airs the room and reduces condensation inside your tent. Outside each bedroom is a high ventilation hatch. Inside each bedroom is a large, low ventilation hatch. The living room comes with a mosquito net and the bedrooms with high mosquito nets.
We test all our tents in a wind tunnel on a turntable. The aim is to expose each side of our tent to the same wind intensity.
Properly pitched, with the guy ropes deployed, this tent remains habitable in wind speed 6, measured at 50 km/h.
We test our tents to validate their waterproofing. The first test is done in the laboratory, 3 hours under 200 litres of water per hour per sqm, equivalent to 200 mm tropical rain per hour. The second test is done in the field under real-life conditions by our teams. This tent is fitted with a polyurethane-coated polyester flysheet measuring 2,000 mm. It also has seams that have been waterproofed with heat-sealed strips, and a 140 g/sqm polyethylene groundsheet.
As designers and users who love nature, we care about the durability of our products. That's why all our tents are designed to be repairable. Spare parts and pole repairs are available at the workshop of your Decathlon store or on our website.
Poles and tent pegs
Poles - All our poles are made from fibreglass and undergo double quality checks. This guarantees some of the best resistance against breakage.
Tent pegs - All our pegs are made of steel and have a diameter of 6 mm.
Our camping tents have been designed for occasional outdoor use (4 weeks per year) when camping or in the great outdoors. Continued exposure to UV rays over several weeks can damage the fabric. These products are not classified as “garden furniture” and aren’t designed to be left outdoors permanently. To guarantee maximum durability of your tent, it's important to store it when not in use.
The Fresh & Black technology keeps the inside of your tent cooler and darker
Cooler and darker for better sleep!
Fresh & Black is a technology patented by Decathlon that allows us to reflect the sun's rays and insulate from the light thanks to specific materials.
This reduces the sensation of heat in the tent and makes it darker.
To get the most out of this technology, don't forget to ventilate your tent at night!