Highlights

Features

Design benefits

adjustable

Wide adjustment tab at the collar. Elasticated cuffs and ankles.

waterproof

2000 mm-rated coating, seams not taped, water repellent fabric. Protective hood.

warmth

150 g/m² wadding. 140 g/m² fleece lining. Warm high collar.

modularity

High collar. Can be converted into a hood with good coverage in a single step.

Design details

Warmth

Our designers use wadding and a special lining to keep the body warm. These polyester-based synthetic components trap more or less air depending on how thick they are. Consequently, the thicker the component (wadding or lining), the more air it contains and the more insulating it is.

Waterproofing

The resistance of a fabric to water pressure is expressed in terms of the height in mm of a water column that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 2000 mm is therefore resistant to the pressure exerted by a 2000 mm column of water. A guarantee of the ski suit's quality.

How can I stop snow from entering my boots?

Put the elastic of the trousers over the boot to prevent snow and draughts from getting inside the boot and trousers.

How to dress your babies so they stay warm on your sledging outings?

To make sure you stay warm and dry, we recommend using the 3-technical-layer rule: Layer 1 or a second skin, to stay dry. Layer 2 or an insulating layer, to keep the heat in. Layer 3 or a protective layer, to protect against bad weather.

What is the water repellent feature?

A water-repellent fabric lets water run off its surface, without absorbing it: the fabric does not soak up water and therefore remains lightweight and warm. You can see drops of water beading and running off the surface of the fabric. The water repellent property is obtained by applying a treatment to the outer surface of the fabric. This treatment needs to be renewed during the lifetime of the garment (every 3 washes).

How to restore the water-repellent properties?

To reactivate the water repellent property, wash the garment inside out on a synthetic cycle at 30°C and rinse thoroughly. You can use your usual washing powder but no fabric softener. Then leave your jacket to air dry completely on a drying rack. Finally, turn your garment the right way round and put it in the tumble dryer on low heat for 10 minutes. The heat will reactivate the water-repellent property of the fabric.

Customisation

A space to enter your child's name in order to personalise the product. A practical feature to find your ski suit at the crèche.

age	12 to 36 months
weather conditions	cold weather
type of layer	layer 3

Raw material	82.586%
Manufacturing	2.703%
Packaging	1.466%
Distribution	3.093%
Use	8.794%
End of life	1.358%

Babies' Ski/Sledge Snowsuit Warm - Blue and Green Print

Highlights

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Carbon footprint

Highlights