Adjustment wheel on the back half of the head.
8 air vents for ventilation and eliminating moisture and 4 rear exhaust grilles.
470g in size M.
Complies with EN 1077:2007 standard (cat. B).ABS Structure for superior strength
Earpieces and thick foam padding.
Lightweight visor that prevents water dripping onto the goggles.
Earpieces equipped with a system that does not reduce external noises.
2 front air vents that can be opened and closed.
The adjustment wheel plays a key role in keeping your helmet secure. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also gives you comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.
This type of structure incorporates an outer shell, made of ABS, injection moulded to withstand powerful impacts. It combines durability with a significant capacity to withstand bumps and knocks. The internal EPOS skullcap absorbs impact and collision at the time of impact. We recommend changing your ski helmet at least every 5 years unless it has sustained a significant impact in the meantime.
EN 1077 Standard
The EN 1077:2007 standard is a European standard that applies to helmets used for cranial protection during downhill skiing and snowboarding. This standard tests the ability to absorb shocks and resistance to penetration. There are 2 categories:
- Class A: protects the top and back of the head, as well as the ears and the side of the head
.- Class B: Protects the top and back of the head but does not cover the ears.
* Measure your head’s circumference in centimetres (around the middle of the forehead and just above the ears).
* Choose the size that covers this measurement.
Example: if you have a head circumference of 56 cm, you should try a helmet in size 55-59 cm.
Take plenty of time to try it on properly. You shouldn't feel any areas of discomfort. If you do then try another model.
Always try your helmet with your mask, because not all helmets go with all masks. A helmet is compatible with a ski mask when there is no air space between the top of the mask and the helmet.
During practice, the ski helmet must be properly fitted and adjusted:
* It is essential to choose the right size.
* The head circumference must be adjusted using the thumb wheel.
* The chinstrap must be properly adjusted.
It's a bit like the seat belt in a car: if it’s too loose, it will not perform its function and you will be less protected.
Avoid putting a thick hat under your helmet as this will move the helmet away from your head and you won't be as well protected.
Opt instead for a very thin beanie or balaclava that does not affect your safety. A helmet has good insulating properties. There is often no point in adding anything else. Also, avoid adding a camera to your helmet as this can affect safety. The standard does not take into account any elements added to the helmet.
EASE OF USE
Removable comfort foam machine-washable at 30°C.
Return terms and conditions (Specific product: personal protection equipment)
Make sure this product is right for you.
Otherwise, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging; it can be refurbished. Together: Let's respect our planet.
Product concept & technology
Do not store in a damp place, near a source of heat or UV rays. Dry before storing, preferably in a fabric helmet bag.
Replace any helmet that has sustained an impact.
All Wedze products are tested under the actual conditions of use for which they were designed: in the snow, in the cold, and in all possible conditions you could come across when skiing. The design teams, product managers, engineers and pattern makers check that the programme for which the product was designed and developed perfectly matches its use in the field.