2L Hydration Bladder

£9.99

This hydration bladder is designed to keep you hydrated when out mountain biking for less than 4 hours.

Slip the 2L water bladder into your hydration backpack for up to four hours of mountain biking. The bite valve is angled at 45° to make it easy to drink from. It has a wide opening for easy cleaning.

Quantity:

Home delivery or Click & Collect
Available
Store stock checker

Product benefits

Capacity

Bring up to 2L of water with you for rides of up to 4 hours.

Mouth comfort

The lockable bite valve is bent at 45° so it's easy to put in your mouth.

Easy maintenance

The wide zip opening allows you to easily clean and fill it.

Technical information

How to look after your hydration bladder

After each outing, rinse and dry the hydration bladder.
To make things easier, use the cleaning kit (code: 5935596) with bottle brush and a drying rack.

Adjustable tube and valve for increased comfort.

You can cut the tube to your preferred length.

To do this, remove the bite valve, place the tube in hot water to soften it, cut it to the desired length and put the bite valve back on.

The valve is lockable to prevent leaks when not in use. On MTB rides, it won't drip, even when in the open position.
To get a good flow when drinking, pinch the valve with your mouth and suck.

Why should you remove the air from the hydration bladder?

To avoid hearing the sound of water moving in the hydration bladder and guarantee optimum water flow for the whole of your MTB ride; How?

Just turn the hydration bladder upside down once filled, direct the air bubbles towards the tube opening and suck them out. That's it! Now you can enjoy the quiet while riding.

The walls of the hydration bladder won't stick together if you suck hard and the water flow will always be just right.

Tips

To avoid a plastic taste when drinking, we advise you to rinse the product 3 times before first use.
After cleaning, leave the hydration bladder open to dry thoroughly.

If the plastic taste won't go away, place the dry hydration bladder in the freezer for one night.

Warranty

2 years

Product concept & technology

Product Composition

Film 70% Ethylene Vinyl Acetate, 30% Polyethylene Air chamber 100% Thermoplastic Polyurethane Handle 100% Acrylonitrile Butadiene Styrene Sliding bar 70% Ethylene Vinyl Acetate, 30% Polyethylene Teat 100% Silicon On/Off system 100% Polypropylene Film/Tube connector 70% Ethylene Vinyl Acetate, 30% Polyethylene Tube/Valve connector 100% Polyethylene

STOCK ADVICE

Wash and dry the product before putting it away. Store in a clean and dry place.You can store your hydration bladder in the freezer to avoid mould forming.

User Directions

-20°C< t°C water<+40°C. no milk, alcohol, or micro-wave use.

TESTS

Our products and materials meet current standards relating to food contact and do not contain bisphenol A (BPA).

Manual

To have more informations about this product, consult the notice

Customer reviews

Loading