Recommended user weight and maximum load
Recommended user weight:
Less than 60 kg: ideal board for easily getting into stand-up paddleboarding on calm bodies of water.
60 to 80 kg : we recommend the larger size (9') for more stability.
Over 80 kg: This model is not made for you, we recommend you use the X100 11 feet.Maximum load to stay on the water = 180 kg.
Inflating & deflating the Stand-Up Paddleboard
Inflation: The SUP is equipped with a new-generation valve to guarantee even more security.
To inflate your SUP, open the cap and connect the pump (“IN” mode).
Inflate to 15 psi for best results.
Disconnect the pump and close the outer cap.
Turn the cap a quarter clockwise (“OUT” mode).Roll, starting from the opposite side to the valve to remove all the air for tight folding.Close the cap.
TO GUARANTEE OPTIMAL COMPACITY FOLLOW OUR FOLDING METHOD
Fully deflate the board
Roll up the product a first time to expel the air through the open valve.
Unroll the board and lay out flat. Fold it lengthways with the fin bases positioned outwards.
Roll up from front to back.
Use the compression strap to keep it rolled up and help you fit it into the bag.
For more details, check out our videos online available on the product page.
Fins and fin bases
Two 118 mm fins for paddling in shallow water.
Available through customer service and online in the event of breakage or loss (8502106).
Remember to remove the fins once you get out of the water.
For your safety, protect your hand if you need to apply force to the rear of the fin to remove it in the event of blockage with sand.If possible, rinse the bases of the fins before and after using the stand-up paddle board for easier fin installation and removal.
INFLATABLE BOARD:Length: 8' (244 cm)
Width: 30" (76 cm)
Thickness: 5" (12.5 cm)
Volume: 187 litres
Weight: 6 kg (±10%)
Height: 48 cm
Width: 31 cm
Thickness: 19 cm
OUR BOARDS CAN BE REPAIRED!
We have a stand-up paddleboard repair kit, reference 8512384.We recommend that you contact the workshop of your local store for all repairs.
We can repair bases of the fins, handles, valves and significant leaks
Very lightweight leash that you won't even know is there during use and is easy to store.
Always wear your leash to stay attached to your board if you fall. To avoid damaging the leash and leaving marks on your folded board, remove and rinse after each use.This leash attaches to the ankle.
PLEASE NOTE: don’t use the leash on the river.
Recommendations for use
Using a buoyancy aid jacket (reference 8501295) or a buoyancy aid belt (reference 8600104)
Not suitable for paddling further than 300 m from shelter.
Don’t use the leash on the river.
Notify someone of your trip and your whereabouts.
Research to find out if there are any local navigation rules that apply to the location of your trip.
COMPACT BOARD STORAGE
Store deflated, flat and out of sunlight, after first removing the fin and leash. If storing inflated, release some of the pressure and store in a flat position without any load.
Excluding transport, you don’t need its extreme compactness, preferably storing it inflated or rolled lengthways.
Availability of spare parts essential to the use of the product: 10 years