Features

Design benefits

waterproof

Tested in moderate rain over 2 hrs 15,000 mm Schmerber Pockets not waterproof

warmth

Jacket, pockets and hood feature a padded lining for greater warmth

windproof

High neck and coated fabric to cut the windchill effect.

ease of use

2 zipped hand warmer pockets. Inside pocket. Adjustable hood.

Design details

Waterproofing

We measure the resistance of a fabric to water pressure in mm of water column (based on the ISO 811 standard). The higher the water pressure withstood by the fabric, the more waterproof it is. Here are the waterproofing ratings: Component resistant to water pressure of 15,000 mm after ageing (5 washes). This equates to 15 000 Schmerber - average pressure exerted by the water during rain. The anorak's waterproofness was tested in a rain shower with 60 litres of water / m² / hour for 2 hours.

Water-repellent properties information

A fabric is water-repellent when water slides off the surface of the fabric, without seeping in. Your jacket does not become waterlogged and remains lightweight and breathable. The water-repellent properties are achieved with a treatment applied to the external side of the fabric, but in practice these properties can be altered. The water-repellent properties can be reactivated by putting the anorak in a dryer for 10 minutes at the lowest temperature.

How important is windproofing?

Protection from the wind is critical, as wind can chill the body significantly whether you are active or at rest. According to the "Windchill" model which measures the temperature felt depending on the wind and cold: at a temperature of 5°C combined with winds of 30 km/h, the temperature felt will be 0°C. If the air temperature is 0°C and wind speed is 40 km/h, the temperature felt will be -7°C. Your 100 warm jacket counters the windchill effect.

How to wash your jacket?

To maintain the water repellent properties, infrequent washing is recommended. Close all zips and flaps, empty all pockets and then turn the garment inside out to wash it. You can wash it on a synthetic cycle at 30°C or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Very important: choose a full-rinse cycle or extra rinse.

How to reactivate the anorak's water repellency

Drying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your anorak flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator. Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.

intensity	low intensity, high intensity
weather conditions	cold weather
rain	moderate rain
type of opening/closing	zip
number of pockets	3 pockets
reversible	not reversible
zip type	full zip
type of lining	warm lining
snow skirt	without snow skirt
waterproof	waterproof, water repellent
hood	with hood
main material	polyester
style	plain
ventilation system	without ventilation
mm H2O (Schmerbers)	15,000 mm
membrane construction	coating
pocket	with pocket
type of length	at the hips
condition	new
windproof	windproof
fit	straight
reinforced area	without reinforced area
sleeves length	long sleeves
modular	not modular
stitching type	with seam
reflective	without reflective zones
type of waterproofing	coating
thumb pass	without thumb pass
type of hood	hood with visor
storage	without storage
lining material	fleece

Raw material	87.248%
Manufacturing	3.023%
Packaging	0.556%
Distribution	4.91%
Use	3.504%
End of life	0.759%

Kids sailing jacket warm and waterproof Sailing 100 blue pink

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Carbon footprint