1-person dome trekking tent MT900, lightweight and free-standing
Introducing our ultra lightweight yet spacious 3-season tent, designed and developed in the French Alps. Featuring ample storage for a comfortable rest during challenging excursions.
ID 8882673
- 365 days to return for members
easy transportTotal weight 1.3 kg Compact & compressible bag 4.2 L Dimensions 39 x 11 x 10 cm
waterproofWater column (Schmerbers): Flysheet > 2,000mm Bedroom groundsheet > 3,000mm
wind resistanceResists winds of 60km/h (Force 7): validated in wind tunnels on rotating plate.
easy assembly / dismantlingSemi-freestanding Y-shaped dome structure Separate flysheet & bedroom 1 pole- WeightTotal weight 1.3 kg Separable parts to help transportation. Flysheet 365 g Bedroom 420 g Pole kit 290 g Pegs (10 pieces) 100 g Bags 45 g + 12 g Guy ropes (4 pieces) 18 g Repair kit (ferrule) 20 g To protect your product and increase your protection from the sun and bad weather, you can complement your MT900 1P tent with the groundsheet with reference: 8545723 (150 g). The weight, volumes & sizes may vary slightly owing to production tolerances.
- Size and living spaceBedroom length 210 cm Bedroom width 60 cm to the head, 70 cm to the pelvis and 50 cm to the feet. Bedroom height 95 cm Total height 110 cm Side porch around 70 cm wide and protected by a built-in sheet which shelters your equipment from the sun and bad weather. This provides storage space for 1 backpack up to about 70 litres. 3 pockets (1 head and 2 top) to keep and organise your belongings. 1 hook & loop for ropes
- Architecture, tent poles and tent pegsLightweight, shock and frost resistant aluminium pole: 7001 T6 Yunan SD70PF Ø 8.3 mm aluminium. Optimised square tent pegs: “anvil” head, oversized main part, extremely resistant and lightweight (7075 T6 aluminium). Simple Y-shaped dome: the main pole splits into 3 feet giving a semi-freestanding structure. Top pole provides volume and therefore capacity.
- Pitching/strikingSeparate flysheet and bedroom. Traditional pitching method: bedroom on the ground and clipped to the poles. Cover the whole tent with the flysheet. Adjust the tautness. If needed, the bedroom can be dismantled from inside. Intuitive pitching thanks to colour coding on the pole, bedroom and flysheet. When it rains, to pitch the flysheet first, you will need the compatible groundsheet (ref 8797781).
- WaterproofingForclaz tents are laboratory-tested: pitched tent, 200 litres/sqm/hour (3 hours, equivalent to a tropical storm). They are also tested in the field by a sample user group. 20 denier polyester (PES) flysheet and 40D polyamide (PA) groundsheet have a polyurethane coating (inside) and silicone (exterior). Seams taped with heat-sealed strips. Multi-component bedroom combining breathability, wind protection and prevents condensation
- Wind resistanceWe test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind. To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 60km/h, measured near ground level. Our tents are certified by the CSTB independent laboratory in Nantes.
- Ventilation and condensation preventionBedroom with mosquito screen for ventilation and water-repellent fabric to protect from condensation and draughts. There are 2 large top ventilation areas that you can close using a Velcro strip. To reduce condensation inside your tent, it must be properly pitched, with the fabric kept taut without being over-stretched. Two-way zips on the door to keep it open. The use of ventilation and good air circulation limits humidity inside your tent
- Seasons3-season tent: your tent will protect you from the harsh weather conditions you can encounter in the spring, summer or autumn. It will withstand light snowfall but is not designed to withstand heavy loads that would weigh on the structure. In case of snow, remember to shake your tent regularly in order to bring down any snow that has accumulated to avoid putting too much weight on the structure of your tent.
- Repairs and After-sales serviceAs designers, we are concerned about the durability of our products, which is why all our tents are designed to be repairable. You will find spare parts (poles, chamber, etc.) on the shelves or in the workshop of your Decathlon shop, on our website, or contact support. In case of problems, don't hesitate to have your tent checked in your Decathlon shop. Repair kit (ferrule, patch): 20 g
- DurabilityYour tent is designed for itinerant bivouacking, it is therefore not designed for static use in the sun. We recommend that you avoid leaving it in the sun as the ultra-light fabrics can be sensitive to UV light, that damages them.
Care instructions
Usage precautions
For more comfort, use a mummy-shaped mattress.
Storage
After using or cleaning the tent, dry it thoroughly before storing to avoid bad odours and mould.
Cleaning
Do not wash.
Do not dry clean.
Do not iron.
Do not tumble dry.
Bleaching excluded.
- Dry after each usage.
- Dry in the open air.
Features
Design benefits
Design details
Specifications
Details
| frequency | intensive |
| weather conditions | mild weather |
| rain | heavy rain |
| number of persons | 1 person |
| assembly type | assembly with poles |
| number of rooms | 1 room |
| storage space | with storage space |
| living area | without living area |
| shape of the tent | dome |
| main material | polyester |
| number of season(s) | 3 seasons |
| weight (in kg) | 1.3 kg |
| freestanding tent | freestanding tent |
| type of poles | aluminum |
| weight of the tent | 1 kg < weight < 2 kg |
Composition
Main fabric: 20.0% Thermoplastic Polyurethane, 80.0% Polyester |
Inside room: 65.0% Polyamide, 35.0% Polyester |
Pole: 100.0% Aluminium |
Usage & care
- 5 years.
All our tents are repairable. Parts and information in store or on our website
Pitching your next trip
