MARES Prestige 2 MRS + wraparound SCUBA diving buoyancy vest

Designed according to ergonomic guidelines, the ERGO inflator is the standard inflation and deflation control unit on Mares buoyancy vests. It is intuitive to use and very easy to handle.

Buoyancy:
S = 150N (15.3 kg)
M = 160N (16.3 kg)
L = 200N (20.5 kg)
XL = 235N (24 kg).

Material: Cordura®1000/Cordura®420.

1/ Rinse your buoyancy compensator thoroughly with clean water. Pay particular attention to the drains and the inflator. 2/ Empty any water that may be contained in the buoyancy compensator by pulling the lower drain tab. Do not store water in the inflatable bladder. 3/ Dry your buoyancy compensator on a wide hanger, out of the sun. Inspect your buoyancy compensator once a year and look for any signs of wear. Inflate the inflatable chamber by mouth, then wait 12 hours to see if it deflates.

It is important to store all diving equipment well clear of sources that produce ozone (electric motors, cookers, etc.) and to protect it against UV rays. If this is not the case, the seals can deteriorate more quickly, affecting your safety or the working order of the regulator. Keep your equipment in a dry place away from heat and direct sunlight.

Your buoyancy vest must be inspected and serviced by a certified Mares centre at least every two years, and more often if you are a frequent diver. After Sales Service: https://support.decathlon.fr/plongee-fr-tp_20687