SUBEA Men’s Scuba Diving 5 mm Neoprene Wetsuit SCD 500

The wetsuit has printed reinforcements on the knees.
There are also prints on the friction zones linked to the buoyancy compensator (shoulders and lower back).
Also provides better body support and prevents the vest from slipping on the slides.
Wrist protection to prevent the dive computer from turning.

This scuba diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille, France) to check it complies with the current standard (EN 14225-1:2017).
CLASS C certified wetsuit:
A (+7°C/+12°C / +45°F/+54°F)
B (+10°C/+18°C / +50°F/+64°F)
C (+16°C/+24°C / +61°F/+75°F)
D (+22°C/+30°C / +72°F/+86°F).

When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. This concept was created to keep you from having to purchase different wetsuits for different diving conditions, with five pieces that can be combined with your wetsuit depending on the temperature.
In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm undersuit or a 5.5 mm oversuit.

This is the most common type of diving suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 to 7 mm. Thanks to their suppleness and modularity, they constitute excellent diving suits.

Put your foot in a plastic bag, then slip your leg into your wetsuit. Your entire foot comes out without snagging! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene wetsuit, immediately separating it from your skin. You can then easily proceed with the final adjustments.

1) Soak the inside and the outside of the wetsuit in clean water after each session.
2) Clean with an antibacterial solution.
3) Rinse thoroughly in clean water.
4) Dry on a wide hanger in a dark and well ventilated place. Caution: the sun will cause the colours of the textile parts of the wetsuit to fade and speeds up the ageing process of the neoprene. Zips can be cleaned with a toothbrush and lubricated with silicone grease.