SUBEA Scuba diving buoyancy compensator with excellent buoyancy SCD 900

The drain tabs have been moved forwards: on the chest for the upper drain, and on the belly under the right-hand pocket for the lower drain. Their shape and the choice of neon yellow also make for an easier grip (by the diver or a mate).
The two large side pockets are able to hold numerous accessories. They are fitted with injected plastic zips to avoid salt build-up that would block them.

For more comfort, the SCD 900 jacket is fitted with a rigid back complemented by a soft compressed 3D foam lining at the points of contact with the back.
The braces are also padded for more suppleness on the shoulders.
The front strap is designed with elastic parts so that the vest fits perfectly on the back and hips.

S =160N (15l steel tank)
M =180N (15l steel tank)
L =210N (15l steel tank)
XL =220N (15l steel tank)
This Subea SCD 900 jacket complies with standard EN 1809: 2014 (the latest version of the standard). It has been certified by the ITALCERT SRL laboratory in MILANItaly (European Notified Body n° 0426).

SUBEA buoyancy compensators are made of high-quality materials that have been tested in seawater and in pools.Fabric material: 400d dobby polyamide. Inflatable chamber fabric: PA210 polyamide with PU laminate. The size label is always visible on the vest’s collar. Supplied with a direct system hose.

1/ Rinse your buoyancy compensator thoroughly with clean water. Pay particular attention to the drains and the inflater. 2/ Empty any water that may be contained in the buoyancy compensator by pulling the lower drain tab. Do not store water in the inflatable bladder. 3/ Dry your buoyancy compensator on a wide hanger, out of the sun. Inspect your buoyancy compensator once a year and look for any signs of wear. Inflate the inflatable chamber by mouth, then wait 12 hours to see if it deflates.

Your buoyancy compensator must be inspected and serviced by a certified SUBEA centre at least every two years, and more often if you are a frequent diver. After Sales Service: https://support.decathlon.fr/plongee-fr-tp_20687

It is important to store all diving equipment well clear of sources that produce ozone (electric motors, cookers, etc.) and to protect it against UV rays. If this is not the case, the seals can deteriorate more quickly, affecting your safety or the working order of the regulator. Keep your equipment in a dry place away from heat and direct sunlight.