SUBEA Wraparound diving buoyancy compensator for deep-water diving SCD 500 model 2020

For added comfort, SUBEA design teams have developed reinforced back padding on the back of the buoyancy compensators, to cushion the tank. The braces are also padded for more suppleness on the shoulders. The front strap contains elastic parts so that the vest fits perfectly on the back and hips.

Five rings: one 3D anodised ring on each shoulder, two 3D anodised rings on the hips and one PVC ring inside the pocket.
Two releasable weight pockets, each holding up to 3 kg.
The chest strap has a built-in whistle to call for help on the surface.
Two loops are also provided to secure a pressure gauge or to hold the octopus so that they are always within easy reach.

The new version of the SUBEA SCD 500 buoyancy compensator is more buoyant.
Buoyancy calculated with a 15l steel tank
XS= 120N
S =130N
M =160N
L =170N
XL =200N
This Subea SCD 500 BC complies with standard EN 1809: 2014 +A1 2016 (latest version of the standard). It has been certified by the ITALCERT SRL laboratory in MILAN
Italy (European Notified Body n° 0426).

SUBEA buoyancy compensators are made of high-quality materials that have been tested in seawater and in pools.
Fabric material: 400d dobby polyamide.
Inflatable chamber fabric: PA210 polyamide with PU laminate.
The size label is always visible on the vest’s collar.
Space is provided for clubs on the left shoulder and the pockets to indicate the size, if necessary.
Supplied with a direct system hose.

1/ Rinse your buoyancy compensator thoroughly with clean water. Pay particular attention to the drains and the inflater. 2/ Empty any water that may be contained in the buoyancy compensator by pulling the lower drain tab. Do not store water in the inflatable bladder.
3/ Dry your buoyancy compensator on a wide hanger, out of the sun.
Inspect your buoyancy compensator once a year and look for any signs of wear. Inflate the inflatable chamber by mouth, then wait 12 hours to see if it deflates.

Your buoyancy compensator must be inspected and serviced by a certified SUBEA centre at least every two years, and more often if you are a frequent diver.
After Sales Service: https://support.decathlon.fr/plongee-fr-tp_20687

It is important to store all diving equipment well clear of sources that produce ozone (electric motors, cookers, etc.) and to protect it against UV rays. If this is not the case, the seals can deteriorate more quickly, affecting your safety or the working order of the regulator. Keep your equipment in a dry place away from heat and direct sunlight.