Free Delivery over £30* | Free Click & Collect at Decathlon Stores | 365 Days to Return
Reference : 8575159
Add to my wish list
Product already added

WEDZE Men's Quick Fastening Piste/Off-Piste Snowboard Boots All Road 900

was £129.99 -%


This price includes a recycling fee for electrical equipment and batteries DecathlonDeeeTaxMentionAfterPrice / Since

From To

* Sales from to Until end of stock
* From and limited stock
£129.99 -%
This price includes a recycling fee for electrical equipment and batteries DecathlonDeeeTaxMentionAfterPrice / Since

* From To

* Sales from to Until end of stock
* From and limited stock
Check availability in store
We have developed this advanced level snowboard boot with a focus on foot support to go fast on hard slopes and in powder. 2 powerful wheel and cable tightenings: one at the bottom of the boot for particularly good foot support, the other at the top to wedge the shin perfectly. Thermoformable liner.

Technical Information

A word from the product manager

The All Road 500 snowboard boot has been improved thanks to your feedback.
For the 2019/20 season, we have changed the liner foam to a softer one providing greater comfort for everyone, yet still thermoformable.
Support, stiffness and now comfort for all are the advantages of these boots. Have a good ride everyone.

DOUBLE CABLE LOCK tightening system

Double Cable Lock: 2 very powerful tightening wheels with cable. There are 2 tightening areas to adjust the tightening as desired in each area:
_ at the bottom: the force of the 1st wheel is concentrated on the instep for the desired support,
_ at the top: the 2nd wheel prevents incorrect tibia movements inside the snowboard boot. You can also tighten it less to soften the boot, or more to stiffen it with the same support (bottom tightening).

Boot flex/stiffness

The All Road 900 flex is medium to rigid (7/10).
Compared to the All Road 500, it has better board steering on hard slopes at full speed and is more solid on landing from big jumps.
The uncoupled clamping lets you: - fasten tighter to stiffen the boot (for piste, freeride or freestyle jump) - loosen to soften the boot (for use on quiet slopes or freestyling: flat, jib)

Heel support: level 3 liner

Foot support is essential when snowboarding, to be able to steer your board well (foot in the liner, and liner in the boot).
The level 3 liner applies 6 concepts:
1. thermoformable liner at home
2. Ergonomic Heel Pad ankle foam
3. "2-point + strap" liner tightening
4. Hook & Loop Link between the liner and boot
5. double layer of foam at the tongue on the instep, for support and comfort
6. 3D insole.

1. Thermoforming the liner independently / PLEASE PAY PARTICULAR ATTENTION


1. Thermoforming the liner independently / INSTRUCTIONS FOR USE

1. Heat your oven, rotary heat mode, to 80°C
2. Remove the insoles of the liners, place the liners on the oven plate with some greaseproof baking paper
3. Wait 15 mins
4. Replace the insoles. Put on a pair of ski-snowboarding socks. Put the liners on and tighten fully.
5. Put the boots on and tighten fully
5. Wait 15 minutes, remaining still
Repeat this process if you still feel discomfort or a lack of support

2. "Ergonomic Heel Pad" ankle foam

Ankle foams fill the anatomical hollow under and behind the ankle to wedge the heel in place.
The level 2 liner contains a foam made in an exclusive Wed'ze material and shape:
- the shape comes from an average of 40 foot scans. It’s perfect for wedging the foot in place and adapts to everyone
- the material: a soft but firm elastomer foam.
You can feel the support as soon as you slip your feet inside. And when you ride, there are no hard points.

3. "2-point + strap" liner tightening

On this liner, we kept just 2 tightening points with laces:
- at the instep
- above the ankle
At the top of the liner, we replaced the 3rd lacing point with a powerful tightening strap.
We therefore reduced the friction of the lace (2 points instead of 3) and concentrated the tightening force to better support the heel. On the upper part, the strap locks the liner even tighter to the shin.

4. Hook & Loop Link between the liner and boot

We added a rip-tab on the back between the liner and the boot.
The aim? To stop the liner slipping inside the boot to help you better steer your board, because just holding your foot in the liner is not enough: if the liner moves in the boot, you’ll have less steering control of your board.


This boot has a 3D insole. This sole is pre-shaped at the heel and arch of the foot to help prevent the foot from moving inside the liner. It provides comfort and thermal insulation. If you feel you need to maintain your foot more securely in the liner, there is another alternative: get a sole that can be thermoformed to suit your foot. This is the most effective solution.

Sole: grip, adhesion, cushioning and thermal insulation

Our Ultralight sole is made only from EVA foam. EVA is an extremely light material made of 80% air. This formulation is designed to resist abrasion while retaining its cushioning properties. It is naturally very insulating and protects you against the cold coming up from the ground. We designed large studs to give you incredibly good grip. Sufficiently far apart from each other, they help get rid of the snow.

How can I be sure it's the right size?

1. Put the boot on
2.Tighten the boot
3. Stand upright
4. Your big toes should just touch the tip of the boot without causing unpleasant pressure
5. Bend your legs forward, your big toes move backwards and no longer touch the end of the boot.

See more See less

Composition / advice

Upper of
100.00% Polyurethane
Outer sole of
100.00% Ethylene Vinyl Acetate
Lining and sock of
100.00% Polyester
Warm lining
100.00% Polyester
Care instructions: To clean with a wet cloth.
Stock advice At the end of the day, remove the liner from the upper to help with ventilation for quick drying. Also remove the liner’s insole for perfect drying overnight.
Restricted use : Thermoforming this liner will improve comfort and support.
Legal notice This product is designed for snowboarding. Using it for any other purpose means you run the risk of exceeding the technical capacities of this product. We strongly recommend that you wear a helmet, back support and protective shorts to enjoy your snowboarding to the full.
How to use your product
How to use your product

Our commitments

Test Product All Dreamscape by Decathlon products are tested under the actual conditions of use for which they were designed. In the snow, in the cold, in all conditions you may come across when snowboarding whether in powder, in the park or on the piste. The creative teams, product managers, designers and engineers check that the programme for which the product was designed and developed perfectly matches its use in the field.
Guarantee : 2 Years

Product benefits

Fit Ergonomic 15 mm foam heel wedging: particularly good support at high speed.
Easy opening / closing Double Cable Lock: 2 wheel and cable tightenings: powerful and precise.
Rigidity Rigid flex (7/10) for board steering precision at high speed.
Thermal insulation EVA foam sole, 80% air to insulate you from the cold coming from the ground.
Fitting comfort Firm foam for a good balance of comfort / support. Thermoformable liner.
Traction Ultralight sole with large studs for good grip on all types of snow
Cushioning Ultralight sole in EVA foam, 80% air for lightness and cushioning.

Your reviews

Reviews by our Team Members

Our customers pictures

Your reviews