Free Delivery over £30* | Free Click & Collect at Decathlon Stores | 365 Days to Return

Best compromise between performance and comfort

  • 15 - Cycling Cycling - 700x25 Resist 9 Road Bike Tyre B'TWIN - Bike Parts and Maintenance
  • 15 - Cycling Cycling - 700x25 Resist 9 Road Bike Tyre B'TWIN - Bike Parts and Maintenance
  • 15 - Cycling Cycling - 700x25 Resist 9 Road Bike Tyre B'TWIN - Bike Parts and Maintenance
  • 15 - Cycling Cycling - 700x25 Resist 9 Road Bike Tyre B'TWIN - Bike Parts and Maintenance
Reference : 8342353
Add to my wish list
Product already added
15 - Cycling

B'TWIN Resist 9 700X25 Protect+ Flex Bead Road Bike Tyre / ETRTO 25-622

B'TWIN
Designed for for regular road cyclists looking for added comfort and grip. 60 TPI carcass. High-density, nylon, reinforcement belt under the tread for puncture prevention. 25mm width provides added comfort. This is a folding bead tyre but is also available in rigid bead.

Tested by road.cc (February 2016): "Overall, the BTwin Resist 9s represent phenomenal value for money and are good cost conscious bet for winter/trainers and workhorses"
User rating
Decathlon
until £14.99 -%

From

£14.99**
This price includes a recycling fee for electrical equipment and batteries DecathlonDeeeTaxMentionAfterPrice / Since

From To

* Sales from to Until end of stock
* From and limited stock
£14.99 %
Before£0.00NoW£14.99**
This price includes a recycling fee for electrical equipment and batteries DecathlonDeeeTaxMentionAfterPrice / Since

* From To

* Sales from to Until end of stock
* From and limited stock
Select Store for Stock
PRODUCT BENEFITS
Compatibility For 700x18 to 700x25 inner tubes and 700 (28") wheels.
Grip Excellent grip in bends.
Puncture resistance Puncture Protect: high-density nylon mesh ply under the tread.
Efficiency Its 25 mm cross section offers exceptional rolling performance.
Weight 320 g. Flex bead.
TECHNICAL INFORMATION
How to measure tyre wear

To measure the wear on your road tyres and to know when they need replacing, you need to inspect the tread. Signs of wear include:
- tread starting to fray
- the appearance of a series of micro cracks
- low tread depth
- the carcass becomes visible.
In all these cases the tyre is worn and needs replacing.

How to remove a tyre

To remove your tyre, deflate the inner tube until no more air comes out.
Once deflated, use a tyre lever to remove the tyre from the rim.

How to fit a tyre

To put the tyre back on, place one side of the tyre into the bottom of the rim. Next, inflate your inner tube to approximately 30% before putting it into the tyre (inflating it beforehand reduces the risk of pinching the inner tube). Then, insert the other side of the tyre into the rim, starting on the side opposite the valve. Before inflating the inner tube all the way, check to make sure it isn't pinched between the tyre and the rim.

How to inflate your tyre correctly

Inflate your tyre carefully. The recommended pressure is indicated on the tyre's sidewall and its product sheet (available online).
Before each outing, make sure that your tyres are at the correct pressure for your ride.

Tip from the pros

When inflating your tyre, make sure you inflate it to the suitable pressure for the terrain you will be riding on and, above all, the weather conditions you will be riding in. When riding in rainy weather, lower the tyre pressure to increase the tyre's traction. On the other hand, when riding in dry weather, you can increase the pressure for better performance.

See more See less
COMPOSITION / ADVICE
Composition
Membrane
30.00% Rubber - Synthetic, 30.00% Rubber - Natural Rubber (NR) - Latex, 20.00% Polyamide 6 (PA6), 20.00% Aramid
Care instructions: For full performance of this tyre, inflate between 6.0 and 8.0 bars depending on weather. You should also check the carcass regularly to avoid any risk of puncture and accident.
Stock advice This is a flex bead tyre: it can be folded for easy storage.
Restricted use : Inflate to the recommended tyre pressure printed on the sidewall
OUR COMMITMENTS
The Wheel Energy laboratory, certified and recognised by leading global brands, measures several different criteria: grip, cushioning, resistance to wear, longevity, performance...
Test Product At B'Twin we create the tyres of tomorrow. Our R&D engineers design our tyres at our international headquarters in Lille, France. These are then tested in our laboratories as well as in real world use by our professional cycling team to ensure outstanding quality. This expertise is specified on our range of B'Twin tyres with the label "DESIGNED IN FRANCE".
Guarantee : 2 Years
FREQUENTLY BOUGHT TOGETHER

Don't forget!

CUSTOMERS HAVE ALSO VIEWED
YOUR REVIEWS
REVIEWS BY OUR TEAM MEMBERS
OUR CUSTOMERS PICTURES