Free Delivery over £30* | Free Click & Collect at Decathlon Stores | 365 Days to Return

Practical with its pockets and reinforcements!

Reference : 8319499

500 Men's Salopettes - Grey

Designed for regular inshore sailors. Less than two weeks of sailing per year in heavy rain. These salopettes, especially designed to provide protection, are waterproof and breathable. Zipped fleece-lined pockets will be a shelter for your hands.

Colour : Carbon grey

Unfortunately, this product is no longer available

TECHNICAL INFORMATION
WATERPROOFING

- Dual-layer hydrophilic fabric
- >10,000 mm of water pressure.
- Fully taped seams.
- Inner flap
- Bottom of the legs adjustable by rip-tab strip.
- Tested under a simulated heavy rain shower (450 L/hr/sqm) for 4 hours

BREATHABILITY

RET <12: very breathable.

To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.

COMFORT

- The waist is adjustable using semi-elasticated rip-tabs.

REFLECTIVE

A large reflective 3M patch on the back intensifies low light sources. The Tribord logos are also reflective.

RESISTANCE TO WEAR

- Injected plastic central zip resistant to salt oxidation.

HOW TO REACTIVE THE JACKET'S WATER REPELLENCY
step 1: before washing

Close all zips and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets.
Then turn the garment inside out to wash it.

HOW TO REACTIVE THE JACKET'S WATER REPELLENCY
step 2: washing

You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach.

Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.

Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVE THE JACKET'S WATER REPELLENCY
step 3: drying

Drying is a crucial phase in reactivating the water repellent treatment.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.

Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round.

HOW TO REACTIVE THE JACKET'S WATER REPELLENCY

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a waterproofing spray sold in our stores.

See more See less
COMPOSITION / ADVICE
Composition
Main fabric
100.00% Polyamide
Main lining
100.00% Polyester (PES)
Secondary lining
100.00% Polyamide
Yoke (General)
100.00% Polyester (PES)
Care instructions: Wash separately for the first wash.
Washing instructions
Machine wash - 30° max - normal
Machine wash - 30° max - normal
Do not bleach
Do not bleach
Do not iron
Do not iron
Tumble dry - low heat
Tumble dry - low heat
Do not dry-clean
Do not dry-clean
Stock advice Store in a dry place, but do not leave your garment on a heat source such as a radiator, as this may damage the breathable membrane or coating.
How to use your product
OUR COMMITMENTS
Guarantee : 2 Years
Additional information
YOUR REVIEWS
REVIEWS BY OUR TEAM MEMBERS